Advertisement
Quick Links
X7672230800
11/11
SHINDAIWA BRUSHCUTTER
SHIELD UPGRADE INSTRUCTIONS
Model 80562
For Brushcutters:
C230, C231, C242, C260, C261, C270,
C2510, C3410, BP35
WARNING!
Minimize the risk of injury to yourself and others! Read the Owner's/Opera-
tor's manual originally supplied with the unit that is being upgraded and
familiarize yourself with the contents. Always wear eye and hearing protec-
tion when operating your unit.
Advertisement
Related Manuals for Shindaiwa 80562
Summary of Contents for Shindaiwa 80562
- Page 1 SHINDAIWA BRUSHCUTTER SHIELD UPGRADE INSTRUCTIONS Model 80562 For Brushcutters: C230, C231, C242, C260, C261, C270, C2510, C3410, BP35 WARNING! Minimize the risk of injury to yourself and others! Read the Owner's/Opera- tor's manual originally supplied with the unit that is being upgraded and familiarize yourself with the contents.
- Page 2 The instructions described in this manual are intended to help Always wear a harness you get the most from your Shindaiwa power tool as well as when operating this unit with a blade. A harness to protect you and others from harm. These procedures are...
-
Page 3: General Safety Instructions
A new label is provided in this kit and additional labels are available from your local authorized Shindaiwa dealer. Prior to installing the new label, Remove old label and clean the outer tube with rubbing alcohol... - Page 4 The Properly Equipped Operator Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not Wear hearing protection devices and a broad-brimmed hat or helmet. wear clothing or jewelry that could get caught in machinery or underbrush.
- Page 5 Be Aware of the Working Environment (all units) Avoid long-term opera- tion in very hot or very cold weather. Make sure bystanders or ob- servers outside the 50-foot “dan- ger zone” wear eye protection. Reduce the risk of FEET bystanders being struck by flying If contact is made with debris.
- Page 6 Kit Contents FITS MODELS Description C230, C231, C260, C270, C3410, C261, C242, C2510 BP35 Cutting Attahcment Shield Sub-Shield Debris Shield Clamp Bolt Debris Shield Upper Clamp Cutting Attachment Shield Mounting Plate 24 mm (small) Outer Tube Shim 24 mm (thick) Clamp Bolt (small) D-Washer (small) Flat Washer (small)
- Page 7 Assembly Removing the Old Cutting Attachment Shield Remove the Existing Cutting Attachment Shield. IMPORTANT! Socket-Head You must know the model designation of the unit before Cap Screws you begin. Some units have an outer tube of a different diameter so the correct size parts must be used to secure Shim Bracket the shield properly.
- Page 8 New Cutting Attachment Shield Assemble the Cutting Attachment Shield to the Outer Tube. Socket-head Cap Cutting Attachment Shield 1. Attach cutting attachment shield Screws mounting plate to gear case hous- ing using clamp screw, washer, and retaining nut, and tighten finger tight. Upper Clamp 2.
- Page 9 NOTES...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 If you require assistance or have questions concerning the application, operation or maintenance of this product you may call the Shindaiwa Consumer Product Support Department at 1-877-986-7783 from 8:30 am to 4:30 pm (Central Standard Time) Monday through Friday. Before calling, please know the model and serial number of your unit.