Detailed Setup Guide; Battery Installation - La Crosse Technology WS-7047U Instruction Manual

DETAILED SET-UP GUIDE FOR THE WIRELESS WEATHER STATION
I) Battery Installation
Note: Batteries will fit tightly. To avoid start-up problems make sure that the batteries do
not spring free.
A) Remote Rainfall Sensor
1. Remove the flat-head screw and
battery cover located on the
underside of the base.
2. Observing the correct polarity
install two AA batteries.
3. Make sure the rubber weather seal
is in place and replace the battery
cover and screw.
4. Separate the base by turning the rainfall
collector in a counter-clockwise direction.
5. Remove the tape from the teeter-totter.
6. Replace the cover.
B) Remote Temperature Sensor
1. Remove the mounting bracket. The bracket snaps on and off
easily.
2. Remove the battery cover by sliding the cover down.
3. Observing the correct polarity install 2 AA batteries.
4. Replace the battery cover by sliding upwards making sure that
the battery cover is on securely.
C) Indoor Weather Display
1. Remove the battery cover. To do this, insert a solid object in the space provided
at the lower-central position of the battery cover, then push up and pull out on the
battery cover.
2. Observing the correct polarity install 2 AA batteries.
3. Replace the battery cover.
MOUNTING THE WIRELESS WEATHER STATION
Battery compartment Battery cover
Teeter-
Totter
4