Reliability; Agency Certification; Safety Certification; Electromagnetic Compatibility - Seagate Medalist 13640 Product Manual

14 Medalist 13640, 10230, 6422 and 3210 Product Manual, Rev. B

1.11 Reliability

Nonrecoverable read errors
Mean time between failures
Contact start-stop cycles
Preventive maintenance

1.12 Agency certification

1.12.1 Safety certification

The drives are recognized in accordance with UL 1950 and CSA C22.2
(950) and meet all applicable sections of IEC950 and EN 60950 as tested
by TUV North America.

1.12.2 Electromagnetic Compatibility

Hard drives that display the CE marking comply with European Union
requirements specified in Electromagnetic Compatibility Directives.
Testing is performed to standards EN50082-1 and EN55022-B.
Seagate uses an independent laboratory to confirm compliance with the
EC directives specified in the previous paragraph. Drives are tested in
representative end-user systems. Although CE-marked Seagate drives
comply with the directives when used in the test systems, we cannot
guarantee that all systems will comply with the directives. The drive is
designed for operation inside a properly designed enclosure, with prop-
erly shielded I/O cable (if necessary) and terminators on all unused I/O
ports. Computer manufacturers and system integrators should confirm
EMC compliance and provide CE marking for their products.
Australian C-Tick
If these models have the C-Tick marking, they comply with the Australia/
New Zealand Standard AS/NZS3548 1995 and meet the Electromag-
netic Compatibility (EMC) Framework requirements of Australia's Spec-
trum Management Agency (SMA).
14
1 per 10 bits read, max
400,000 power-on hours
(nominal power, 25°C ambient tem-
perature)
40,000 cycles
(at nominal voltage and temperature,
with 60 cycles per hour and a 50%
duty cycle)
None required