Kyocera SLIDER SE44 User Manual page 109

4. Select New Doodle to open the drawing screen.
You will see a flashing cursor in the middle of the screen:
selected
tool
The selected tool is highlighted in yellow. By default, the selected tool is
"draw black."
5. Use keys 1–9 to move the cursor around the screen as
indicated. Press
Using the Doodler toolbar
To change between the tools on the toolbar, highlight the
desired tool.
Tip: For a shortcut to the Move feature, press
User Guide for the Kyocera Slider Phone
cursor
to bring the cursor back to center.
.
91