Getting Started; Charging The Battery - Kyocera SLIDER SE44 User Manual

1 G
ETTING
Your Kyocera SE47 phone comes with an internal/removable lithium ion (LiIon)
battery. Fully charge the battery before using the phone.
Installing the battery
1. Hold the phone face down.
2. Place the battery on the bottom lip of the phone casing,
aligning the metal contacts with those inside the phone.
3. Push down on the battery until it clicks into place.

Charging the battery

The battery is partially charged when you receive your
phone. You must have at least a partial charge in the
battery to make or receive calls, regardless of whether the
AC adapter is connected to the phone.
You can safely recharge the battery at any time, even if it has a partial charge.
User Guide for the Kyocera Slider Phone
S
TARTED
1