Clock Operation - Sangean WFR-1 User Manual

Preset
Preset allows you to store the most frequent listened stations that
you can select those stations easily and quickly. You can preset up to
10 stations for each Internet Radio, FM and Digital Radio (DAB plus).
To store a preset:
. Turn to the required band (Internet Radio, FM or Digital Radio (DAB
plus) and station.
2. Press and hold the required preset button (1 to 10) on the remote
control until the display shows "Preset stored". The station will be
stored in the chosen preset. Repeat this for the remaining presets if
needed.
To recall a preset:
. Enter the required band (Internet Radio, FM or Digital Radio (DAB
plus).
2. Press the required preset button (1 to 10) and your remote control
will then to the station stored in the preset memory. Or Press the
PRESET/STOP button and use the TUNING KNOB to select  of the
0 presets.
33

Clock Operation

The radio must have the clock/date set to use the alarm functionality.
Clock/Date Setup
. To setup the time go to > System settings > Time/Date > Set Time/Date.
. Use TUNE+/TUNE- or Turning knob to adjust the values and use
FORWARD/BACK to move back and forth between fields.
Press the Turning knob or the
between fields or confirm.
Time Zone Setup
To setup the time go to > System settings > Time/Date > Set timezone.
Then select the time zone.
Daylight savings Setup
To setup the daylight saving time go to > System settings > Time/Date
> Daylight savings. And then select yes/no for the daylight savings.
Time/Date Auto Update
Auto update menu allows the user to select whether or not the time/
Date is to be synchronized with the Internet.
● To setup the auto update go to > System settings > Time/Date > Auto
update and choose the source of the update.
button to move back and forth