Scan/Rotary Manual Tuning; Scan Tuning - Sangean WR-2 Operating Instructions Manual

Scan tuning

. Press the power On/Off button.
2. Select the required waveband by repeatedly pressing the band
button.
3. Press and release Scan button, your radio will scan the selected
waveband and stop automatically when it finds a station of
sufficient strength.
4. Set volume control and tone control to the desired setting (described
later on volume and tone control)
5. To switch off your radio, press Power On/Off button.
Rotary manual tuning
. Press the on/off button to switch on your radio.
2. Select the required waveband by repeatedly pressing the Band
button.
3. Rotary tuning the Tuning knob will change the frequency in the
following increments,
FM 50 kHz or 00 kHz
MW 9 kHz or 0 kHz
4. Set the volume and tone controls to the desired settings.
5. To switch off your radio , press the On/Off button.
9