Rear Panel - Zoom STUDIO 1201 Operation Manual

(7) REVERB TYPE/EFFECTS selector
When bank A is selected with the BANK switch:
Selects the reverb type.

Rear Panel

ZOOM STUDIO
MODEL
SERIAL NO.
ZOOM CORPORATION
MADE IN JAPAN/FABRIQUÉ AU JAPON
(1) INPUT jacks
Serve for connection to the sound source, such as the send jacks of an
instrument or mixer. Mono sources should be connected to the
L/MONO jack and stereo sources to both jacks (L/MONO for left
channel and R for right channel).
Note: A preamplifier (such as integrated in a mixer) or a compact effect
device is required when wishing to use the 1201 with an instrument
with low output level, such as an electric guitar or bass, or with a
high-impedance instrument (470 kilohms or higher).
When bank B or C is selected with the BANK switch:
Selects the effect type from each bank.
For each bank, 11 settings are available, resulting in a total of 33 reverb
and effect types.
1201
POWER
DC9V 300mA
(2) OUTPUT jacks
Serve for connection to the return jacks of an instrument or mixer, or to
recording/playback equipment.
(3) EFFECT ON/OFF jack
The optional foot switch FS01 can be connected here, for switching
effects on and off with your foot. When effects are off, only the original
sound is heard and the front- panel LED indicator flashes in orange.
(4) (3) (2)
EFFECT ON/OFF
R L
FS01 OUTPUT
4
(8) BANK switch
Selects one of the three effect banks (A, B, C). A bank is a group of
related effects. Bank A contains reverb type effects and banks B and C
contain modulation and multi-effect settings.
(1)
R L/MONO
INPUT
(4) DC INPUT jack
The cable from the supplied AC adapter is connected here.
Note: When the AC adapter is plugged into an AC outlet, the 1201 is
automatically turned on.