Table of Contents
Advertisement
(10) Page key
r
(1 2) UTILITY key
(1 3) EFFECT key
COMPARE
I
(1 6) TRIGGER key
I
C
EXECUTE PRG-CHG
CONTROL IN
I
I
l
I
(14) STORE (EXECUTE) key
1
(1
5 )
CANCEL (PRG-CHG LEARN) key
L
(1 8)
Power switch
(9) Data Entry controls 1, 2 and 3
(1 1) Compare key
I
(15) CANCEL (PRG-CHG LEARN) key
External Control
1
(17) CONTROL IN jack
When in the Utility mode or Store function, this key is
(16) TRIGGER key
used to cancel the operation and return to normal
operation. When in normal operation, it is used to call
For tap-trigger control over certain effect parameters.
up
the Program Change
L e &
menu.
(17) CONTROL IN jack
For connection of an external footswitch or foot pedal.
(You should use the optional ZOOM footswitch and
foot pedal for this.
)
(18) Power switch
For turning the power to the 9120 on and off.
Rear Panel
(7) DC IN
---'
L
L
(1) INPUT jacks (UMONO, R)
(6) LCD contrast
dial
(2) Input level gain switch
(5) MlDl IN, MlDl OUT terminals
(3) OUTPUT jacks (VMONO,
R)
L (4) Output level gain switch
INPUT jacks (L/MONO, R)
For input of the audio signal. If only the L/MONO
input is used, the signal automatically becomes mono.
Input level gain switch
For setting the input level gain to
+4
or -20dBm.
OUTPUT
jacks (LiMONO, R)
For output of the audio signal.
Output level gain switch
For setting the output level gain to
+4
or -20dBm.
(5) MIDI IN, MIDI OUT terminals
For connection to other MIDI devices, such as a
synthesizer or sequencer. These are used for remotely
controlling the 9120 from a synthesizer, or for storing
data of the 9 120 to another device.
(6) LCD contrast dial
For adjusting the display contrast.
(7) DC IN
For connection to the included AD-0002 AC adapter.
Section I :
Names
and Functions of the Controls and Terminals
5
Advertisement
Table of Contents
