Connections - Zoom FIRE-30 Operation Manual

This section explains how to operate the panel controls and how to use patches and other
When connecting a multi-effect
device (such as the ZOOM 606
or 707II) between the guitar and
the FIRE-30, set the [DRIVE
TYPE] knob to "EFFECT IN".
Guitar
606 or similar effect pedal
FS01
To toggle between manual
mode and program mode
with your foot, connect
the separately available
foot switch ZOOM FS-01
here.
ZOOM FIRE-30

Connections

To monitor the output of the
FIRE-15 with headphones,
connect the headphone plug to the
[RECORDING/PHONES] jack.
(When a plug is inserted in this
jack, the speaker output is
automatically turned off.)
To record the output of the FIRE-30,
connect the recording device such
as the ZOOM MRS-1266 to the
[RECORDING/PHONES] jack.
To input the signal from a CD player or
other stereo playback device, use a stereo
cable and connect it to the [AUX IN] jack.
The signal input here is mixed internally
with the guitar signal.
CD player or similar
Headphones
MRS-1266 or similar recording device
Connections
Power Cord
9