Assembling Procedures Of Main Parts And Cautions - Sharp SJ-P43N-SL Service Manual

SJ-P43N/43N
SJ-P47N/47N

ASSEMBLING PROCEDURES OF MAIN PARTS AND CAUTIONS

CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE ANY REPAIRING.
1. R-AIR GUIDER ASSEMBLY
R air guider S
(Only for SJ-43N,47N)
(1) Forming sensor of Damper thermo.
After forming, fix it to the refrigerator.
(2) Setting R air guider S
R air guider
A-sealer ag1
(Only for SJ-P43N,P47N)
R air guider
and sticking sealers to R air guider.
(Only for SJ-43N,47N)
R air guider S
(Only for SJ-43N,47N)
Masking tape
A-sealer ag1
A-sealer ag1
Plasma holder
Ionizer-K
Plasma harness
Figure A-1
Damper
thermostat
NOTE
Minimum bending radius is R5mm.
There should be no gas leak by reforming of sensor tube.
Figure A-2
A-sealer ag1 A-sealer ag1
OVERLAP 15mm
OVERLAP 15mm
DATUM
A-sealer ag2 A-sealer ag2
Dial sealer
Figure A-3
18
Damper thermo.
A-sealer ag3
A-sealer ag2
Dial sealer
R air guider
DATUM
A-sealer ag3