Salus RXRT505 Instruction Manual page 16

SETTING UP RF COMMUNICATION WITH
YOUR THERMOSTAT
1. Ensure the switch on the RF
integral boiler module is in
the AUTO
2. Gently press and hold the SYNC
button with a blunt object.
After 3 seconds the Boiler
Control LED will flash once
every second to indicate it is
ready to pair and ready to
receive a signal from the
thermostat*.
3. The LED will turn off when pairing is successfull.
* For full instructions on thermostat pairing see:
RT505TX Manual - Page 13
RT305TX Manual - Page 9
16
ST325TX Manual - Page 15
ST625TX Manual - Page 11
RXVBC605 INSTRUCTION MANUAL