E-Mail And Ftp Services Settings - Kogan KAIPC01BLKA User Manual

the first four characters for remote access. For example, http://abcd.viipcam.com
the user's name is abcd. The password is DDNS. (The password can be obtained
on the device body or contact the supplier). When connected, it displays "xxxxx is
OK" on Device Info; it means that it was successfully set. If you need to use your
own Dynamic DNS, please select the appropriate service providers (on DDNS
service) then enter the following information and save.
3.4.6 E-mail and FTP service Settings
The above setting is a preparation for the alarm function The sender should enter
the senders email address, recipient 1, 2, 3, 4 is filled with recipients email
addresses: SMTP server should be filled with the sender email SMTP server
e.g. thesender email address is abc@163.com Enter mail.163.com. Generally
SMTP port is 25 and should be unchanged; Enter SMTP user and SMTP
password which are both provided by email provider. Test according to reference;
when it is triggered and needs to send email notification please click Email
notification Internet IP address The e-mail server and other information can be
obtained from the mail service provider and the email notification will include the
image captured when triggering the automatic email notification. If you do not
want automatic email notifications, do not enter this information.
Set up FTP service, you can fill in parameters like the example below;
Figure3.15
Figure3.16
17