Pppoe Installation; Ip Camera & Pc Connection - Kogan KAIPC01BLKA User Manual

2.2.2. PPPoE Installation

Under this connection, users must set PPPoE dialing parameters on the IP
camera itself. Input the username and password of ISP supplier and allow the IP
camera to connect to internet. To set the PPPoE dialing parameter connect the
device to network through the first way, then write parameters to the device.
Another option is to follow the third way to direct process parameter and write to
device. For detailed steps please refer to 3.4.5.
2.2.3. IP Camera & PC connection
This method is not used as often, but when you process machine be sure to write
parameter or program shift. We recommend you adopt the LAN connection to
process the modification of machine parameter.
Connect to IP camera (note: don't apply wrong power). After one minute
modification, video should be connected by internet cable directly to the camera.
When yellow light is on and green light is blinking, you will know that the physical
6