Logging And Active X Installation - Kogan KAIPC01BLKA User Manual

Figure3.4
Note:
IP Address: Fill in IP address, ensure that the IP address' network segment you
have filled is the same as the PC network segment.
Mask: Use the default subnet mask e.g: 255.255.255.0
Gateway: Ensure that the device's network gateway is the same as your PC' s.
DNS: DNS service provider's IP address.
Port: Device provides HTTP services, port, usually 80
User and password: The default administrator account is admin. Password is
blank.
Use DHCP Device uses Dynamic Host Configuration Protocol. If enabled each
time you start the device will be from a DHCP server (typically a router or modem)
to obtain IP addresses. If not you must manually set the IP address.
Type the correct user name and password (user must have administrator
privileges) and update system firmware with the Web UI firmware

3.2. Logging and Active X installation

Before Internet Explorer can access through the web, you first must install a video
plug-in. Installation mode is below:
Open disk, find icon. Double click this icon and process
installation. Click the next step to finish.
10