Table of Contents
Advertisement
1.11 Connecting to Wired Network
Step 1 – Choose LAN Setting
Note: make sure LAN cable connecting to LAN socket already.
1. Press MENU
2.
Press
or
3.
Press
or
4.
Press
or
5. Move cursor to < Wired >, press
6. Move cursor to < DHCP enable >, press
OK now!
Step 2 – Enter Internet Radio mode
Press MENU 'Main menu', press
Radio', press
SELECT
is showing up, stop pressing.
Step3 – Access Network
Continue the above steps, few seconds later, it will show:
1.12 Shift to Wireless Network
1. Refer to previous page 'choose LAN setting' steps 1-4,
press
.
SELECT
2. Move cursor to < DHCP enable >, press
to access to wireless network.
Now, your wireless setting is OK!
< Main Menu >, press
Press
or
to
< System settings >, press
to
to < Network >, press
to < Manual settings >, press
SELECT
SELECT
to confirm. Or, press MODE repeatedly until < Internet Radio >
SELECT
to confirm.
SELECT
SELECT
to confirm.
to confirm.
SELECT
to confirm.
to confirm. The LAN setting is
SELECT
to confirm. While cursor is at 'Internet
If it fail to connect to network, please
follow:
a. Check your Router, see it working normally or
not.
b. Check your LAN cable, make sure it hasn't
been damaged,
c. See the port of cable which insert to LAN
socket is fully plugged in.
press
to confirm, and then go step by step
SELECT
15
to confirm.
< Wireless >,
or
to
Advertisement
Table of Contents
