Contrast; Factory Reset; Enter Setup Wizard - Kogan KADABXXDLXB User Manual

8.4 Contrast


For Power on condition:

Note: The high brightness level will provide easy viewing of station information.
1. It can be activated from < Main menu >  < System settings >  < Contrast >
Power On Low/Medium/High. (Setting to high level is recommended)

For Standby condition:
Above setting principle suits standby condition too, setting to low level is recommended. You
can feel comfortable without the bright light distracting or bothering you

Note: While in Power on condition or Standby condition, you can simply conduct contrast setting
by pressing Dimmer via remote control.

8.5 Factory Reset

A factory reset resets all user settings to default values, so time/date, network configuration
and presets are lost.
However the radio's current software version is maintained, as is registered with the
Internet radio portal.
Internet radio favourites can also be kept unless you re-register your radio with another
account on the portal website.
1. It can be achieved by pressing MENU  < Main menu >  < System settings >  Factory
Reset  Proceed? YES or NO.
2. Press or to 'Yes', and then press SELECT to confirm.

8.6 Enter Setup Wizard

When this unit is started for the first time, it runs through a setup wizard to configure
settings for date/time and network.
Once this has finished, the system is ready to use.
1. To run the setup wizard again, press MENU  Main menu  System settings  Setup
wizard  Yes.
28