Table of Contents
Advertisement
3. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and
display the password entry screen as follows:
Press
or
to cycle through the alphanumeric character list, press SELECT to select an
appointed character.
Note: WEP/WPA pass codes are case-sensitive.
If a wrong character is being input while entering your password, select
'
' to delete that character.
Note: a.>
b.> The method of select
select
c.> Select
d.> Radio will automatically save the WEP/WPA you've input, so you won't need to re-enter these
codes.
e.> After selected the final character of your password, press
confirm.
1.3 Access Wireless Network
1. After successfully 'setup wizard' as above picture, press SELECT to confirm to exit. Move the
cursor to < Internet radio >, press SELECT to confirm.
2. Move the cursor to < Station list >, press SELECT to confirm.
= Backspace.
,
, then press
to select
will return to previous track.
or
, while cursor point to
or
10
, press
in turn.
to
, press SELECT to
to
Advertisement
Table of Contents
