Fm Mode; Tune In Fm Mode; Scan Setting; Audio Settings - Kogan KADABXXTBLA User Manual

FM MODE

T une in FM Mode
1.
Press MODE to convert radio from DAB mode into FM mode.
2.
For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
Otherwise, the last listened FM station will be selected.
3. To manually change FM frequency, while frequency is showing up, turn SCROLL to
adjust it 0.05MHz per step.
4.
To auto-searching, simply press SCAN, the display will show the frequency changing until
it reaches the next active station.

Scan setting

 By default, FM scans stop at any available station. This may result in a poor signal-to-
noise ratio (hiss) from weak stations.
 To change the scan settings to stop only at stations with good signal strength:
1. Press MENU, it will show: 'Scan Setting', press SCROLL to confirm.
2. Turn SCROLL to 'Strong stations only', and press SCROLL to confirm.

Audio Settings

 By default, all stereo stations are reproduced in stereo. For weak stations, this may result
in a poor signal-to-noise ratio (hiss).
 To play weak stations in mono:
1.
Press MENU turn SCROLL to 'Audio setting', press SCROLL to confirm.
2. Turn SCROLL to 'Forced mono', press SCROLL to confirm.
10

