Table of Contents
Advertisement
DAB MODE
Turn on
1. Extend the antenna found on the back of radio, press STANDBY/ON to switch on radio.
2. On initial use, it will make a full scan and store stations list in memory.
3. Once the scanning is completed, the DAB+ stations will be displayed in alphanumeric
order. The first station in the list will be selected.
if no DAB+ signal is found in your area, it may be necessary to relocate your radio
Note:
to a stronger signal area.
Shift to a nother DAB + Station
While a program is playing, turn SCROLL to cycle through available stations, press
SCROLL to confirm and then your radio will connect to the selected station.
Update Stations List
Simply press SCAN, or, press MENU, while it shows 'Full scan', press SCROLL to
confirm.
To Show the Signal Strength
During playing a DAB+ program, repeatedly press INFO until the LCD screen display shows a
signal bar with the strength of the current station.
The indicator on the signal bar shows the
minimum acceptable signal level.
Note: Stations with signal strength below the
minimum signal level may not provide a
steady stream of audio.
7
Advertisement
Table of Contents
