Table of Contents
Advertisement
S et Alarm
Note: Before setting Alarm, make sure you set the time first.
1. Press ALARM, it will show "Alarm 1 Setup", press ALARM again access to "Alarm 2
Setup". The relevant alarm icon will highlight.
2. Taking set alarm 1 as example, while "Alarm 1 Setup" is displayed, press SCROLL to
confirm.
3. Now, follow your radio instruction, configure the following parameters:
Alarm states: On or Off
On Time: 00:00 (alarm sound time )
Duration Time: 15/30/45/60/90 minutes
Note: The alarm will sound until the duration time passes if nobody stops it.
Source: DAB, FM and Buzzer
Set Days: Daily, Once, Weekends or Weekdays
Volume level: remember don't have your radio volume level to zero (Mute),
otherwise, when alarm triggers, it won't be heard.
Postpone Alarm :
When alarm is sounding, press SCROLL to postpone it for 5 minutes, repeated presses
will prolong snooze to other user-defined snooze time.
While in SNOOZE function, your radio goes into standby mode and shows how long
snooze will be elapsed, during this moment, you can also press STANDBY/ON to put the
alarm off and press STANDBY/ON again to have your radio play.
After the SNOOZE time elapses, alarm will sound again.
Turn off Alarm:
When alarm is sounding, press STANDBY/ON to turn it off.
To cancel the Alarm:
Refer to above steps1-3, set 'Alarm states' to 'Off ', and then follow your radio's
instructions, until it shows 'Alarm saved'.
14
Advertisement
Table of Contents
