Before First Use - Kogan KAIRN01STMA User Manual

● Always place the iron on the stand or on its heel. Do not put the hot iron on the supply hose or
the mains cord. Make sure that mains cord and the supply hose do not come into contact with
the hot soleplate.
● Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the
water tank.
● Always place the appliance on a stable, level and horizontal surface.
● When you have finished ironing, or plan to leave the iron for a short while, unplug the iron
and put it on the iron stand.
● If steam escapes from the steam tank when the appliance is heating up, switch the appliance
off and tighten the Calc-Clean rinsing plug. If steam continues to escape when the appliance is
heating up, switch the appliance off and contact the KOGAN support team.
● Rinse the steam tank once a month or after 10 times of use to prevent damage to your iron.
● Never remove the Calc-Clean rinsing cap or unscrew the Calc-Clean rinsing plug when the
steam tank is hot.

Before first use

● The iron may give off some smoke when you use it for the first time. This is normal and will
stop after a short while.
● White particles may out of the soleplate (F) when you use the iron for the first time. This is
normal; the particles are harmless and will stop coming out of the iron after a short while.
● When you switch the appliance on, the steam station may produce a pumping sound. This is
normal; the sound tells you that water is being pumped into the boiler.
1 Remove any sticker or protective foil from the soleplate (F) and clean the soleplate (F) with a
soft cloth.
2 Place the steam station on a stable and level surface, i.e. on the ironing board or on a table.