Using The Appliance; Ironing Without Steam - Kogan KAIRN01STMA User Manual

Tips
‐If the article consists of various kind of fibers, always select the temperature required by
the most delicate fiber, i.e. The lowest temperature. If, for example, the fabric consists of
60% polyester and 40% cotton, it should be ironed at the temperature indicated for polyester
(●●).
‐If you do not know what kind of fabric the article is made of, determine the right ironing
temperature by ironing a part that will not be visible when you wear or use the article.
‐
Silk, woolen and synthetic materials: iron the reverse side of the fabric to prevent shiny
patches.
‐
Fabrics that tend to acquire shiny patches should be ironed in one direction only (along with
the nap ) while applying very little pressure.
‐
Start ironing the articles that require the lowest ironing temperature first.
● To make the iron cool down faster, simply apply steam or iron a piece of cloth.

Using the appliance

Steam ironing
The cord hose (T) may become hot during a long ironing session.
● When plugged in, the power indicator light on the panel will start flashing and the iron will go
into standby status. Press the power indicator button and the product will start working.
● The system may occasionally produce a pumping sound during steam ironing. This is normal
and tells you that water is being pumped into the steam tank.
1． Make sure there is enough water in the water tank..
● Steam ironing is only possible at higher ironing temperatures (higher than ●●).
● When the minimum level in the detachable water tank (H) has been reached, the "water tank
lower water indicator light (P) will flash. This means you need to put water into the
detachable water tank (H). The lower water indicator will stop flashing when you've put
sufficient water into the detachable water tank (H).
2. Press the steam button (A) to start steam ironing
3. Pull up the steam trigger(B) to start continuous steam.
4．Turn-on the steam control knob (O) for adjust steam.
● During steam ironing, the Steam indicator light goes on from time to time to indicate
temperature and pressure.
● The opening and closing of the steam valve in the steam station will cause a clicking sound.
This is normal.

Ironing without steam

1 Start ironing without pressing the steam station.