Kogan EZINAV G4 GPS User Manual page 5

Hide thumbs Also See for EZINAV G4 GPS:
Table of Contents

Advertisement

Charge the GPS navigator fully with the charger before the first use.
The Kogan G4 GPS can be powered by the built-in battery or external power supply.
When the GPS navigator is unconnected to the charger, it is powered by the Li-polymer
battery. The battery capacity icon
in the system main interface shows current
residual battery capacity.
When the GPS navigator is connected to the charger, it is powered by external power and
the battery is charged.
[Attention] The GPS navigator adopts an internal removable Li-polymer battery. To avoid
battery rupture, explosion, release of hazardous substance or burn, do not unpack, pierce,
strike on or discard the battery in fire or water.
The work temperature of the device is 0~50°C and its storage temperature is -10~60°C.
Do not leave the device under heat sources or in high thermal areas such as an
unattended vehicle in the strong sunshine.
End-of-life battery disposal please follow local relevant regulations
Plug the USB terminal of the AC adapter into the USB port on the left side of the GPS
navigator and the other to the power socket to supply power and charge the GPS
navigator.
[Note] The charging indicator light is red during charging. Do not unplug the AC adapter
until the battery is fully charged and the indicator light turns green. Please charge the GPS
navigator when the battery is low or used up in succeeding use.
Plug one terminal of the car charger into the USB port on the left side of the GPS
navigator and the other to the charging port to supply power and charge the GPS
3

Advertisement

Table of Contents
loading

Table of Contents