Kogan EZINAV G4 GPS User Manual page 29

⒑
Connect the GPS navigator to PC via the MINI USB port to transmit data, or back up data
from the navigator data to PC.
The GPS navigator provides MASS STORAGE and MS STORAGE modes. Select one in
the USB setting.
1. Have the GPS navigator in operation status and the SD card plugged in the slot;
2. Tap in the system setting interface to enter
Select
3. Connect the MINI USB terminal of the USB cord to the MINI USB port of the GPS
navigator and the standard USB terminal to the USB Host port of PC. Then the PC will
recognize the navigator and prompt the following interface. To disconnect the navigator
from PC and enter USB charging mode, you may select
Close Exit the FM Setting.
Save Save current setting.
Use FM Tick in the box to enable FM function.
Frequency Drag the slide block rightwards (or tap
increase the frequency and leftwards (or tap
reduce the frequency. The frequency range is 88.00
Mhz-108.00 Mhz.
and tap to save it.
28
as shown below.
.
) to
) to