Kogan EZINAV G4 GPS User Manual page 30

4. After communication, unplug the MINI USB cable.
1. Tap in the system interface to enter
Select
2. Install the application
appear in the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI USB port of the GPS
navigator and the standard USB terminal to the USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device drive in the selection
area to enter the memory of GPS navigator for data transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety back up the navigator data. We assume no responsibility for
data loss or damage
and tap to save the setting.
in a drive of PC. Then the following icon will
29
as shown below.