Download Print this page

3M 8515/07189 User Instructions

N95 particulate

Advertisement

Table of Contents

8515/07189

Respirator N95 Particulate

07189 is a catalog number only. NIOSH approved as 3MTM 8515 N95 Particulate Respirator.

See insert for approval label.

3M recommended for welding, brazing,

metal pouring and cutting

User Instructions

(Keep insert for reference)

Distributed by:

T M

.c om

(888) 933-0100

1

Table of Contents

Advertisement

Table of Contents

Need help?

Need help?

Do you have a question about the 8515/07189 and is the answer not in the manual?

Questions and answers

Summary of Contents for 3M 8515/07189

Page 1 8515/07189 Respirator N95 Particulate 07189 is a catalog number only. NIOSH approved as 3MTM 8515 N95 Particulate Respirator. See insert for approval label. 3M recommended for welding, brazing, metal pouring and cutting User Instructions (Keep insert for reference) Distributed by: .c om...
Page 2 This respirator helps protect against certain particles. Misuse may result in sickness or death. For proper use, see supervisor, or instructions, or call 3M in U.S.A., 1-800-247-3941. In Canada, call Marketing at 1-800-265-1840, ext. 6137 or Technical Service at 1-800-267-4414. IMPORTANT: Before use, wearer must read and understand these User Instructions.
Page 3 Time Use Limitation: If respirator becomes damaged, soiled, or breathing becomes difficult, leave the contaminated area and replace the respirator. Fitting Instructions: to be followed each time respirator is worn. Fig. 1 Fig. 3 1. Cup the respirator in your hand, with the nosepiece at your fingertips, allowing the headbands to hang freely below your hand.
Page 4 sides of your head. If you CANNOT achieve a proper seal, DO NOT enter the contaminated area. See your supervisor. Removal Instructions: See step 2 of Fitting Instructions and cup respirator in hand to maintain position on face. Pull bottom strap over head.
Page 5 FOR MORE INFORMATION and assistance on 3M occupational health and environmental safety products, contact your local 3M representative or call 3M OH&ESD Technical Service toll free in U.S.A., 1-800-243-4630. In Canada, call Marketing at 1-800-265-1840, ext. 6137 or Technical Service at 1-800- 267-4414.