Software Update; Enter Setup Wizard; Sw Version And Radio Id - Kogan KGNDRVDA User Manual

Software Update

From time to time, your radio may have software upgrades available with bug fixes and/or
additional features.
If your radio detects that newer software, it asks if you want to go ahead with an update. If you
agree, the new software is then downloaded and installed.
After a software upgrade, all user settings are maintained.
Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
connection. Disconnecting power during a software update may permanently damage the unit.
It can be activated by pressing and holding MENU à System settings à Software update à Check
now, press the SELECT knob to confirm. Or if you want your radio 'Auto-check', please follow:
1. It can be activated by pressing and holding MENU à System settings à Software update à Auto-
check setting, press the SELECT knob to confirm.
2. Turn the SELECT knob to < YES >, press this knob to confirm.

Enter Setup Wizard

When this unit is started for the first time, it runs through a setup wizard to configure settings
for date/time and network.
Once this has finished, the system can be ready to use.
1. To run the setup wizard again, press and hold MENU
2. Press the SELECT knob to confirm, then step by step to set it.

SW Version and Radio ID

This information may be requested when dealing with technical support issues.
1. It can be activated from < Main menu > à < System settings > à < Info >, press the SELECT
knob to confirm, and then you can get what you want.
C A U T I O N
à
System settings
23
à à
Setup wizard Yes.