Setup Wizard - Kogan KGNDRVDA User Manual

Setup Wizard

Step 1 - Power up
1. Connect to your Internet Radio adapter and ensure the power LED is lighting up.
2. In use, it can be switched on or off by pressing STANDBY/ON. For initial use, it will show you a
welcome message and ask you to 'Setup wizard'.
Step 2 – Setup wizard
1. Continue above, press the SELECT knob to confirm 'YES', and then turn this knob to your preferred
'hour format', press it to confirm.
2. Press the SELECT knob to confirm 'Update from Network'. Now, follow your radio's instruction,
configure the following parameters:
þ Timezone: select your local timezone.
þ Daylight saving: On or Off
þ Wlan region: Most of Europe/USA/Canada/Spain etc.
þ SSID: In some cases radio may find more than one network. Turn the SELECT knob to your
favorite one, press it to confirm.
@
Note: If your network is not configured to request a password (WEP/WPA), radio will connect to
the network and display:
3. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and display
the password entry screen as follows:
6