Carrying Handle; Lock-On Button; Features; Spindle Lock Button - Ryobi C357 Operator's Manual

CARRYING HANDLE

See Figure 3.
For convenience when carrying or transporting your cut-off
machine from one place to another, a carrying handle has
been provided on top of the machine arm as shown in
figure 3. To transport, turn off and unplug your machine, then
lower machine arm and lock it in the down position. Use the
transport chain to lock machine arm in the down position.

LOCK-ON BUTTON

See Figure 3.
Your cut-off machine is equipped with a lock-on feature
which is convenient when continuous cutting for extended
periods of time is required. To engage the lock-on feature,
depress switch trigger, push in and hold the lock-on button
located on the side of the handle, then release switch trigger.
Release lock-on button and machine will continue running.
To release lock-on feature, depress switch trigger and release.
If you have the lock-on feature engaged during use and your
machine becomes disconnected from power supply,
disengage the lock-on feature immediately.

SPINDLE LOCK BUTTON

A spindle lock button has been provided for locking the
spindle which keeps the wheel in your machine from rotating.
Depress and hold the spindle lock button while installing,
changing, or removing wheel only.
UPPER
WHEEL GUARD
POWER CORD
TRANSPORT
CHAIN
RUBBER FEET

FEATURES

CARRYING HANDLE
SPINDLE
LOCK BUTTON
ADJUSTABLE
FENCE
FENCE
BOLTS

TRIGGER LOCK

See Figure 4.
To prevent unauthorized use of your cut-off machine, we
suggest that you disconnect it from the power supply and
lock the switch in the off position. To lock the switch, install
a padlock (not included) through the hole in the switch
trigger. A lock with a shackle up to 13/64 in. diameter may be
used. When the lock is installed and locked, the switch is
inoperable. Store the padlock key in another location.
LOCK-ON
BUTTON
VISE CLAMP
MACHINE BASE
Page 9
SWITCH TRIGGER
PADLOCK
MACHINE ARM
SWITCH TRIGGER
LOWER
WHEEL GUARD
14 in. (356 mm)
ABRASIVE WHEEL
QUICK LOCK-
RELEASE LEVER
VISE CRANK
HANDLE
WRENCH
STORAGE
8 mm
HEX KEY
Fig. 4
Fig. 3