Boss BR-1200CD Owner's Manual page 49

4
Use the TIME/VALUE dial to select the song's initial track type.
For example, let's select USE DRUMS + LOOP PHRASE for this song.
Initial Track Types
12 AUDIO TRACKS
USE BASS
USE DRUMS + LOOP
USE DRUMS + BASS + LOOP
Track types can be freely changed even after Song New has been completed.
5
Press [F3] (GO).
The message "New Song..." will appear on the display and a new song will be created. When finished, the message
"Complete!" will appear and the display will automatically return to the top screen.
In certain cases, the message "Save Current?" will appear during the procedure described above. This indicates that
the currently selected song contains recorded audio data and/or edited data that has not been saved. If you want to
save this new data, press [ENTER/YES]; if you don't want to, press [EXIT/NO]. Note that if you press [EXIT/NO], the
recorded audio data and/or edited data will be lost; accordingly, be careful not to press this button by mistake.
Preparing a song for recording (Song New)
All tracks from 1 through 11/12 are set up as audio tracks.
Track 8 is used as a bass track, and the remaining tracks 1 through 7,
9/10, and 11/12 are used as audio tracks.
Track 9/10 is used as a drum & loop phrase track, and the remaining
tracks 1 through 8 and 11/12 are used as audio tracks.
Track 9/10 is used as a drum & loop phrase track, Track 8 is used as a
bass track, and the remaining tracks 1 through 7 and 11/12 are used
as audio tracks.
49