Boss BR-1200CD Owner's Manual page 262

With Windows
6. When the "BR-1200CD" icon (or "Removable Disk (*:)"
icon) is displayed, double-click this icon.
All of the backup files and folders will appear on-screen.
7. Select all of the backup files and folders.
Extra care should be taken to ensure that each and
every file and folder is selected and copied. If files or
folders are missed, the recovery will be incomplete
and subsequent recovery operations may not be
possible.
8. Copy them to the "BR-1200CD" (or "Removable Disk
(*:)") icon on the computer.
All of the files and folders copied in Step 7 will be
returned to the BR-1200CD's internal hard disk.
During the recovery operation you may encounter
messages asking whether it is all right to overwrite
certain files—you should select "YES" in every
instance. If "NO" is selected even once, the recovery
operation will be incomplete, and this may prevent
the BR-1200CD from operating correctly.
9. Quit the connection to the computer.
With Windows XP
In My Computer, right-click on the "BR-1200CD" icon
(or "Removable Disk (*:)" icon) to "Eject" the disk.
If this procedure fails to eject the disk, use the procedure
below
1) Click the icon in the task tray, then click the
"Stop USB Disk-drive (*:)" message displayed there.
fig.52-100
Task bar
262
Task tray
2) Click [OK] in the "Safe To Remove Hardware" dialog
box that appears.
With Windows 2000/Me
1) In My Computer, right-click on the "BR-1200CD" icon
(or "Removable Disk (*:)" icon) to "Eject" the disk.
2) Click the icon in the task tray, then click the
"Stop USB Disk-drive (*:)" message displayed there.
fig.52-100
Task bar
3) Click [OK] in the "Safe To Remove Hardware" dialog
box that appears.
10. Press BR-1200CD's [EXIT/NO].
The message "Now Re-Loading..." will appear on the
BR-1200CD's display, and the most recently selected
song will be reloaded.
When reloading has been completed, the display will
return to the USB screen.
• If you are using an OS other than Windows Me, the
message "Now Re-Loading..." will appear on the BR-
1200CD's display immediately after "Remove
Hardware" is carried out, and the most recently selected
song will be reloaded. When reloading has been
completed, the display will return to the USB screen.
• If you press [EXIT/NO] without quitting the connection
to the computer, "Disconnect USB, OK?" appear. In this
case, pressing [ENTER/YES] returns the USB menu
screen to the display.
11. Press [EXIT/NO] to return to the Top screen.
At this point, you can safely disconnect the USB cable
from the BR-1200CD and the computer.
If the current song contains newly recorded audio
data or newly modified settings, the message "Save
Current?" may be displayed during the recovery
procedure. If you want to save your song before
starting the recover process, press [ENTER/YES];
if this will not be necessary, press [EXIT/NO].
Remember that if you do not save a modified song
at this time, all newly recorded audio data, edited
data, modified mixer settings, etc. will be lost.
Task tray