Boss BR-1200CD Owner's Manual page 24

Panel Descriptions
fig.0005-03
44
31. TAP button
By tapping this button along with your song, you can set the
tempo for the Drum, Bass and Loop Phrases (p. 158, p. 173, p.
187).
32. V-TRACK button
Calls up a screen for selecting V-Tracks (p. 44).
33. TRACK MUTE button
If you hold down [TRACK MUTE] and press a track button
that is currently lit in green, the corresponding track will be
muted (or silenced) during playback. You can then perform
the same procedure once again to cancel muting. While a
track is muted, its track button will flash in green (p. 46).
• If a track being recorded is muted, the BR-1200CD will
automatically cancel muting when recording has ended.
• Track Mute is not enabled for tracks other than those
whose Track Type is set to AUDIO (p. 157, p. 171, p. 185).
The Track Mute is also cancelled with the track type is
changed.
24
47
46
32 36
34
40
43
35 33
34. TRACK TYPE SELECT button
Calls up a screen for selecting track types. Tracks 8 and 9/10
can each be set to one of two track types—namely, tracks used
for recording audio or tracks used for rhythm arrangement
components such as Loop Phrases, Bass, and Drums. Possible
settings for these tracks are as follows:
Track 8 Audio track or Bass track
Audio track or Drum (metronome) & Loop
Track 9/10
Phrase track
"Section 4 Using Rhythm" (p. 153)
35. TRACK TYPE indicators
These indicators allow you to confirm the current track types
for Tracks 8 and 9/10.
Lit
Track 8 Bass
Drum (metronome)
Track 9/10
& Loop Phrase track
37
38
39
41
42
45
31
Unlit
Audio track
Audio track