Connecting The Power Supply; Controlling The Punching Speed - Janome FM 725 Instruction Book

q
q
w
e
q

Connecting the Power Supply

Turn the power switch OFF. Insert the foot control plug
into the machine socket.
Insert the power supply plug into the wall outlet.
Turn the power switch ON.
q Power switch
w Foot control plug
e Machine socket
r Power supply plug
r
The symbol "O" of a switch indicates the "OFF" position
of the switch.
Polarized plug (one blade wider than the other):
To reduce the risk of electrical shock, this plug is
intended to fit in a polarized outlet only one way. If it
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet.
Do not modify the plug in any way.
Foot control model YC-482J or TJC-150 is for use with
Punching machine model 725.

Controlling the Punching Speed

The punching speed can be varied with the foot control.
The harder you press the control, the faster the
machine runs.
10
For USA and CANADA only