Design Features - Rockford Fosgate PUNCH 100.2 Operation & Installation

D F
ESIGN EATURES
Punch 100.2
Punch 120.2
1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch
amplifier dissipates heat generated by the amplifier's circuitry. The
inherent advantage of casting provides a 30% improvement of cooling
over conventional extrusion heatsink designs.
2. Speaker Terminals – The heavy duty, gold-plated terminal block
connectors (+ and –) will accept wire sizes from 8 AWG to 18 AWG.
These gold-plated connectors are immune to corrosion that can cause
signal deterioration.
3. Power Terminal – The power and ground connectors on the Punch
amplifier are gold-plated and will accommodate up to 8 AWG wire
maximizing the input current capability of the amplifier.
4. REM Terminal – This spade terminal is used to remotely turn-on and
turn-off the amplifier when +12V DC is applied.
5. RCA Input Jacks – The industry standard RCA jack provides an easy
connection for signal level input. They are gold-plated to resist the signal
degradation caused by corrosion.
9 8 4 7
LED
HP–Full–LP
+6dB
Left
80Hz Right
+12dB
Input
Crossover
Input
Punch
Bass
9 8 4 7
18dB
LED
HP–Full–LP
80Hz
Left Right Punch
Crossover
Input Input Bass
6 5 3
0dB
REM
Gain
High Level
+ –
Input
Left
Output
6 5 3
0dB
Gain REM
High Level
+ –
Input
Left
Output
– 5 –
2
+ – B+ GND
Right
Output
2
+ – B+ GND
Right
Output
1
1