When making connections to this or any other component, make sure all components are off. Turn off all systems’ power before connecting the PS Audio component to any other component. Make sure all cable terminations are of the highest quality.
Page 4
By varying the actual gain of the GCP-200’s internal circuitry, rather than attenuating the signal and the There are no re-amplifying it again, the PS Audio GCP-200 provides the shortest, cleanest audio path of any active attenuators preamplifi er in the world.
200 or any of the Ultimate Outlet or Power Director series from PS. We do not recommend the use of simple AC fi lter power conditioners, not made by PS Audio, as most of these will ”bleach” the sound and rob the music or video soundtrack of some measure of life and dynamics. If you do not use PS Audio power conditioning equipment, you would be advised to plug the GCP-200 directly into the AC wall receptacle.
Preamplifi er. Be sure to use a high quality well shielded and well regarded interconnect for this critical link. PS Audio makes an entire line of excellent choices for interconnects, perfectly matched to your equipment’s needs. RCA or single ended inputs will be the typical inputs as many sources have only this standard type of RCA inputs input.
Page 7
It is advisable to use as short a power cable as possible to the GCP-200 Stereo Preamplifi er. We do not recommend plugging the GCP-200 Stereo Preamplifi er into an extension strip or plug extender unless it is of the highest quality and heavy duty design, such as the PS Audio Juice Bar or device with similar properties.
Do not attempt to get inside the unit for any reason unless instructed to do so by your dealer or an authorized service representative. Should the GCP-200 Preamplifi er cease to function, contact your dealer or PS Audio’s service center for help. Placement of the GCP-200 Preamplifi er is not critical. Placement with respect to other equipment can be important.
If there is no sound and you are convinced the GCP-200 Preamplifi er has power and its front panel light is lit, contact your dealer, distributor or PS Audio for further assistance. If there is a lot If there is an excessive amount of hiss or noise from the loudspeaker, it is probably not from the GCP- 200 Preamplifi...
Page 17
GCP-200. Turntable based music systems require a work properly special amplifi er known as a phono preamplifi er. PS Audio makes an excellent phono preamplifi er that is designed to work with any preamplifi er.
Page 18
PS Audio or an authorized PS Audio repair center.
Page 19
In the unlikely event of service required beyond the capability of the importer, PS Audio will fulfi ll the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.
Page 20
Canada Service Department. 2. Insure and accept all liability for loss or damage to the product during shipment to the PS Audio factory and ensure all freight (shipping) charges are prepaid. The product may also be hand delivered to the California or Colorado facilities if arrangements with the Service Department have been made in advance.
Page 21
If you have If you feel your country’s authorized dealer or distributor is either unwilling or unable to service your PS Audio products, please contact our service department at service@psaudio.com or at the above problems contact numbers to discuss the situation.
Need help?
Do you have a question about the GCP Stereo and is the answer not in the manual?
Questions and answers