Page 2
Contact your PS Audio distributor or the PS Audio customer service department for Inside the U.S. and Canada more information. PS Audio’s warranty is 3 years parts and labor, from the date of original purchase. Service issues This means that we warranty the product Should your unit ever require service or if itself regardless of ownership, new or used.
Table of Contents What’s In the Box 2. Warning • One PS Audio Power Plant P300 2. Safety Instructions • One 2m power cable 2. Overview • One operating manual • One 5amp slow blow spare fuse 3. Quick Start Guide 3.
Warning Overview To prevent fire or shock hazard, do not The Power Plant P300 is a power expose the unit to rain or moisture. To avoid regenerator capable of delivering the highest electrical shock, do not open the enclosure. level of AC performance to all audio and Refer servicing to qualified personnel only.
My turntable or fan based equipment is not operating normally Specifications Any turntable or equipment with AC synchronous fans should not be used with Output: MultiWave II. These products must be used Power 300 Watts with 60Hz SINE mode. Voltage 95-240 Vts Frequency 50-120 Hz...
[P-4] MultiWave4 MultiWave4 is full combination of P-1 and P- 2. It generates a pseudorandom collection of The Power Plant P300 sets a new mark for frequencies, however instead of generating performance and protection. It has been sine waves it generates the same waveform designed to bring forth the absolute best as P-1.
The P300 comes from the factory with 6. Power Ports™ standard default settings that should work Two PS Audio Power Ports™ provide well for most situations. The type of power the best possible connection to power delivery can be configured to achieve the equipment.
1 hertz increments from There are four buttons on the front panel of 50Hz to 120Hz by using the Up and Down the Power Plant P300. buttons. The default setting is 60Hz. 1. Power Voltage produced 2.
MultiWave II Waveforms accurately on the Power Plant's meter. For true power consumption figures consult the owners manual of the connected product. [sin] SineWave In the sine wave mode the Power Plant will Under normal operation a green LED will generate a perfect sine wave (50-120Hz).
Need help?
Do you have a question about the Power Plant P300 and is the answer not in the manual?
Questions and answers