Download  Print this page

PS Audio PD 3.5 Operating Instructions Manual

Ps audio operating instruction.
Hide thumbs
   

Advertisement

Table of Contents

1.
What's in the Box
2.
2.
3.
Quick Start Guide
4.
5.
5.
5.
6.
7.
8.
Contact Information
What's in the Box
• One Power Director 3.5
• One 6 foot AC power cord
• One logo trim tool
• One user's manual
• One warranty card
IMPORTANT: Be sure to save all packing ma-
terials included with your Power Director 3.5
as they will be required if it is necessary to
ship the unit for service or modification.

Advertisement

Table of Contents

   Summary of Contents for PS Audio PD 3.5

  • Page 1: Table Of Contents

    Table of Contents What’s in the Box Warning Overview Quick Start Guide Rear Panel Front Panel DC trigger Logo trim tool Troubleshooting Guide Warranty and Service Contact Information What’s in the Box • One Power Director 3.5 • One 6 foot AC power cord •...
  • Page 2: Warning

    The Power Director 3.5 is a power management device capable of delivering superb AC perfor- mance to your audio and video components. The PS Audio Power Director 3.5 is designed to operate as a stand-alone power management tool, or as a part of a larger power management system.
  • Page 3: Setup Guide

    Use with PS Audio Power Plants The Power Director 3.5 can be used in conjunc- tion with any of the PS Audio Power Plants or other PS Audio power devices. The Power Plant can either be used at the output of one of the zones or to provide power to the Power Director 3.5.
  • Page 4: Rear Panel

    1. Power mode switches The Power mode switches correspond to each of the Power Zones. These switches are used to control how the power zones respond to the front panel power button. They can be set in the following ways: •...
  • Page 5: Front Panel

    If this situ- ation persists contact service at PS Audio. Note: any zone whose corresponding rear panel switch is in the “ON” position will continue to pass power and provide surge protection even if the director is in standby mode.
  • Page 6: Troubleshooting Guide

    If this situ- ation persists contact service at PS Audio. The PS logo does not illuminate. If all power mode switches are set to ON then the Power Director 3.5 will still continue to pass...
  • Page 7: Warranty And Service

    In the 14 lbs unlikely event of service required beyond the capability of the importer, PS Audio will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory.
  • Page 8 PS Audio International, Inc. 4826 Sterling Dr. Boulder, CO 80301 USA Toll Free: 877-772-8340 Ph: 720-406-8946 Fax: 720-406-8967 www.psaudio.com...

This manual is also suitable for:

Power director 3.5

Comments to this Manuals

Symbols: 0
Latest comments: