When making connections to this or any other component, make sure all components are off. Turn off all systems’ power before connecting the PS Audio component to any other component. Make sure all cable terminations are of the highest quality.
Page 4
Introduction Owner’s Reference UPC-HB Power Center Thank you for your purchase of the PS Audio UPC-HB Power Center. What will it do? The UPC-HB is designed to provide AC cleaning, isolation and complete protection from surges, spikes and power line problems from the AC power line, as well as providing hum free operation for products connected.
AC wall receptacle or you can use an aftermarket power cord and receptacle. We strongly recommend the use of a PS Audio xStream Power™ AC cable and a PS Power Port™ AC receptacle to feed the UPC-HB power. While the supplied power cable is adequate for the task it is not going to provide the best performance.
UPC-HB into an extension strip or plug extender unless it is of the highest quality and heavy duty design, such as the PS Audio Juice Bar or device with similar properties. If the AC power source is a balanced transformer or Power Plant, plug the UPC-HB into the output of the transformer or Power Plant.
Do not attempt to get inside the unit for any reason unless instructed to do so by your dealer or an authorized service representative. Should the UPC-HB cease to function, contact your dealer or PS Audio’s service center for help. Is the AC The AC receptacle is a critical link in the electrical chain.
Page 12
In the event the product fails to meet this Warranty and the above conditions have been met, the purchaser’s sole remedy under this Limited Warranty shall be to return the product to PS Audio or an authorized PS Audio repair center where the defect will be repaired without charge for parts or labor.
Page 13
PS Audio will fulfi ll the conditions of the warranty. Such product must be returned at the owner’s expense to the PS Audio factory, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.
Page 14
RA number must be inside the box to number qualify for service. If you are transferring your warranty, you must fi rst contact PS Audio or your dealer or distributor for details. To contact the PS Audio Service Department:...
Page 15
2. Insure and accept all liability for loss or damage to the product during shipment to the dealer or distributor’s Service Department and ensure all freight (shipping) charges are prepaid. If you feel your country’s dealer or distributor is either unwilling or unable to service your PS Audio If you have products, please contact our service department at service@psaudio.com or at the above contact...
Need help?
Do you have a question about the UPC-HB Power Center and is the answer not in the manual?
Questions and answers