It is recommended that components be isolated by device type (digital, analog, video, etc.) and/or by power supply type (switch mode or linear) wherever possible. • Rack Mountable The Power Play AV-5000 and AV-3000 are rack mountable using the included rack mounting hardware. • Removable Support Feet The feet of the Power Play may be removed in order to save rack space.
Important: If connecting the PS AV Power Center to an uninterruptable power supply (UPS), such as the PS Audio PowerPack, ensure your total load does not exceed the rating of the UPS. Connect the Load Connect each of the devices to be powered by the PS AV Power Center.
During the self test the device will illuminate the display window and display model and firmware information Upon completion of the self test the PS AV Power Center may be turned on by pressing the PS Audio blue logo button in the center of the front panel.
AV-5000 - touch the IP indicator repeatedly until the display window shows: “IP” “###.###.###.##” AV-3000 - press the status button repeatedly until the display window shows: “IP” “###.###.###.##” POWERCENTER is the default HOSTNAME. If you have multiple PS AV Power Centers in your home you may edit the HOSTNAME as outlined in the Network Settings below.
Installation and Operating Instructions AV-3000 and AV-5000 Power Centers 2.6.1.2.3 Display Level Change the brightness of the PS Audio logo power button and display Bright Default - full brightness Dims the display Defeats the display. Note: When the Display Level is set to Dim of Off touching the...
AV-3000 and AV-5000 Power Centers 2.6.1.2.6 UPS Priority When PS AV Power Center is connected to a PS Audio PowerPack battery backup you may control how each outlet shuts down in a battery backup situation. Using the drop box you may select one of the following options: None –...
You may toggle the Master Power setting of your PS AV Power Center by pressing the blue PS Audio logo button located in the center of the front panel. The Master Power setting will only affect the outlets you have set to Switched, Delay and/ or Programmed.
Installation and Operating Instructions AV-3000 and AV-5000 Power Centers 2.6.2.2 AV-3000 From the front panel of the AV-3000 you may alter the main system power, check device status, and alter the power state of any zone. 2.6.2.2.1 PS AV Power Center Master Power You may toggle the Master Power setting of your PS AV Power Center by pressing the blue PS Audio logo button located in the center of the front panel.
Need help?
Do you have a question about the AV-3000 and is the answer not in the manual?
Questions and answers