PROLiNK Hurricane 9000G Quick Installation Manual page 3

Step 4 PROLiNK Wireless Receiver Configuration
4.1 PROLiNK WG1000 PCMCIA 802.11G Wireless Card
a After installing the Driver and Utility Program, you will see the
Wireless LAN utility icon on your desktop
b For Win XP user , go to Ctrl Panel > Network Connections > LAN
or High-Speed Internet > Right Click the Wireless Network
Connection > Properties > Wireless Networks > Uncheck "Use
Windows to configure my wireless network settings" > OK
c Double-click the 802.11g Wireless LAN Utility icon on your
desktop
If you have enable the security encryption in the H9000G > Click
Privacy tab > WEP > None > Configure...
d For e.g. if your H9000G is enabled with
Key #1 > Password :
In the WEP Configuration > Key Size : 40 bit (64bit) > Select 1 >
Key in password : 1234567890 > Authentication : Open System
> Key Format : Hex > OK
e Click Main tab > click Rescan > under SSID column: select your
H9000G SSID (default:Prolink11g) > click Connect > click OK
64bit (Hex) encryption >
1234567890
4.2 PROLiNK WG2000 USB 802.11G Wireless Adapter
a After installing the Driver and Utility Program, you will see the
Wireless LAN utility icon on your desktop
b For Win XP user , refer to Step 4.1b first.
c Double-click the 802.11b+g USB Wireless LAN Utility icon on
your desktop
Click Refresh > under SSID column: select your H9000G SSID
(default:Prolink11g) > click Connect this site
d If you have enable the security encryption in the H9000G and you
see the below message box (Use Previous WEP Setting) >
Select No
e For e.g. if your H9000G is enabled with
Key #1 > Password :
In the WEP Key Setting > Click Change > Key Length : 64bit >
Default Key ID : #1 > Key Format : Hexadecimal > Key Value :
#1 : 1234567890 > Apply
f Once connected , it will show the SSID connected
(default:Prolink11g) and indicate the Signal Strength and Link
Quality of the connection
64bit (Hex) encryption >
1234567890