Related Manuals for Ikan PT4000
Summary of Contents for Ikan PT4000
- Page 1 Features you need, Prices you want. PT4000 20” Teleprompter User Guide 3903 Stoney Brook Dr. Houston TX 77063 Tel: 1.713.272.8822 Fax: 1.713.995.4994 www.ikancorp.com support@ikancorp.com © 2009 ikan Corporation. All right reserved.
-
Page 2: Package Includes
INTRODUCTION Thank you for purchasing the ikan PT4000 20” Teleprompter. The PT4000 is easy to use and will quickly become an integral part of your studio. For more information on this and many other innovative ikan products, please visit our website: www.ikancorp.com. -
Page 3: Assembly Instruction
Long Phillips head screws down as tight as possible. This will support the weight of the monitor. 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 2 of 10... - Page 4 Be sure that your tripod and head can handle it. 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 3 of 10...
- Page 5 8 x Part-G (Place the Part-Q Part-L Part-C on the inner sides) Part-G Part-C 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 4 of 10...
- Page 6 Velcro to the sides of the frame. This will allow the Hood to connect when you place it on the assembled Teleprompter. velcro metal frame camera lens monitor 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 5 of 10...
- Page 7 Step A C. Tighten drawstring around lens or lens hood to prevent light leaks. velcro ikancorp.com 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 6 of 10...
- Page 8 Connect with DVI: You can also use a DVI signal from your source with this input. Connec with A/V for PiP: You can connect a BNC cable to your PT4000 to receive a composite signal, in order to use Picture-in-Picture.
- Page 9 1) Fist thing to do is make sure that the monitor of the PT4000 is plugged in powered on and connected to the VGA port of you computer. (It’s the blue 15 pin connector on the back of your computer) 2) The easiest way to set up your computer if you are using a laptop is to use the hot keys.
- Page 10 Click on apply. i. You are now ready to start Prompter Pro V.2 (For Step 7) For additional help please call the ikan support team at 713-272-8822 or email us at support@ikancorp.com Office Hours: 9am - 6pm Central Time...
- Page 11 PT1000 or PT2100 for usage on-location and in the field. 3903 Stoney Brook Dr. Houston TX 77063 | +1.713.272.8822 | www.ikancorp.com | support@ikancorp.com | © 2009 ikan Corporation. All right reserved. 10 of 10...
Need help?
Do you have a question about the PT4000 and is the answer not in the manual?
Questions and answers