Assembling The Blades - Hunter Type B Owner's Manual And Installation Manual

6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws. If you used grommets, the blades may appear slightly
loose after screws are tightened. This is normal.
6-3. Loosen the blade iron armature screws that are holding the
shipping bumpers in place. Push the shipping bumpers in, then
lift them off.
6-4. Slide the blade irons onto the blade iron armature screws.
Tighten the blade iron armature screws as tight as possible with a
screwdriver.
Note: The blades on this fan have been treated
with Hunter's Dust Armor protection, making
the blades less likely to attract dust and dirt.
Use a dry or slightly damp lint free cloth to
clean the blades. Do not use a furniture polish
or any other cleaners that leave any residue, as
they will damage the protective Dust Armor
on the blades.
6 • Assembling the Blades
Blade Iron
Armature
Screw (tighten
securely)
Shipping
Bumper
Blade
Iron
Blade Iron
Armature Screws
Step 6-3
12
42796-01 • 04/06/11 • Hunter Fan Company
Step 6-1
Grommet
Blade Assembly
Screw
Steps 6-1 – 6-2
Blade Assembly
Screw
Grommet
Blade