Related Manuals for Hunter Bowl Light Kit
Summary of Contents for Hunter Bowl Light Kit
- Page 1 Bowl Light Kit Bowl Light Kit Bowl Light Kit Owner’s Guide and Installation Manual Manual De Propietario Form# 43546-01 20090408 ©2009 Hunter Fan Co.
-
Page 2: Table Of Contents
• To reduce the risk of personal injury, install this light fixture only on Hunter® fan types A through Z. Note: The fan type can be found on the ceiling fan package or on the nameplate label located on top of Table Of Contents the motor housing of the ceiling fan. - Page 3 Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of three ways, depending on the type of switch housing. The steps in this manual include instructions for all three installation methods. Fans with a removeable switch housing, fans with a non-removeable switch housing, and The Hunter Original.
-
Page 4: Installing The Light Kit On Fans With Removable Switch Housing
Lower Switch Housing Steps 1-2 Plug Button Washer Threaded WARNING: Improper installation could cause the light fixture to fall. Lower Switch Housing Attachment Screws Light Fixture Steps 3-6 43546-01 • 04/08/09 • Hunter Fan Company... - Page 5 9. Reinstall screws to reattach the lower switch housing to the upper switch housing. 10. Go to the instructions for Installing the Bulbs, Chains, and Globe. Step 7 Plug Connector Steps 9-10 Housing Assembly Screw Lower Switch Housing Plug Connector Detail 43546-01 • 04/08/09 • Hunter Fan Company...
-
Page 6: Installing The Light Kit On Fans With Non-Removable Switch Housing
Hole wires or wire strands are visible after making the connections. WARNING: Improper installation Attachment Screw could cause the light fixture to fall. Light Fixture Wires and Wire connectors Step 7 Steps 3-6 43546-01 • 04/08/09 • Hunter Fan Company... - Page 7 9. Securely tighten the two screws. 10. Go to the instructions for Installing the Bulbs, Chains, and Globe. Wires and Wire connectors Steps 8-9 43546-01 • 04/08/09 • Hunter Fan Company...
-
Page 8: Original
Installing the Light Kit on the Hunter Original 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing cap should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here”... -
Page 9: Installing Bulbs, Chain, And Globe
Thread the light pull chain For Light Bulbs through the finial and screw the finial onto the threaded rod end Metal Rod until tight. Metal Disc Pull Chain Glass Bowl Breakaway Connector Cover Plate Finial 43546-01 • 04/08/09 • Hunter Fan Company... -
Page 10: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. # 400 Memphis, Tennessee 38016 This Light Fixture Weighs 6 lbs. Printed in China 43546-01 • 04/08/09 • Hunter Fan Company...
Need help?
Do you have a question about the Bowl Light Kit and is the answer not in the manual?
Questions and answers