Hunter Bowl Light Kit Owner's Manual And Installation Manual page 5

Installing the Light Kit on Fans With Removable Switch Housing (Continued)
7. Remove the wire connectors from the two wires in the switch
housing labeled "Connect Light Here" or "For Light Use."
To connect the wires, hold the bare metal leads together
and place a wire connector over them, then twist the wire
connector clockwise until tight.
Connect the black wire with a white stripe from the switch
housing to the black wire from the light kit. Connect the white
wire from the switch housing to the white wire from the light
kit. Secure all wire connections using wire connectors.
CAUTION: Be sure no bare metal wires or wire strands are
visible after making the connections.
8. Reconnect the 9-pin plug connector.
9. Reinstall screws to reattach the lower switch housing to the
upper switch housing.
10. Go to the instructions for Installing the Bulbs, Chains, and
Globe.
Steps 9-10
Lower Switch
Housing
Plug
Connector
Detail
Plug
Connector
5
43546-01 • 04/08/09 • Hunter Fan Company
Wires
and Wire
connectors
Step 7
Housing
Assembly Screw