Related Manuals for Hunter Rosette
Summary of Contents for Hunter Rosette
- Page 1 Rosette Low Profile Rosette Low Profile Rosette Low Profile Light Kit Light Kit Light Kit Owner’s Guide and Installation Manual Manual De Propietario Form# 43565-01 20100305 ©2010 Hunter Fan Co.
-
Page 2: Table Of Contents
• To reduce the risk of personal injury, install this light fixture only on Hunter® fan types A through Z. Note: The fan type can be found on the ceiling fan package or on the nameplate label located on top of Table Of Contents the motor housing of the ceiling fan. - Page 3 Installation Methods of Hunter® Ceiling Fans Type A-Z Your ® light kit can be installed in one of three ways, depending on the type of switch housing. The steps in this manual include instructions for all three installation methods. Fans with a removeable switch housing, fans with a non-removeable switch housing, and The Hunter Original.
-
Page 4: Installing The Light Kit On Fans With Removable Switch Housing
6. Install the nut and washer inside the upper switch housing onto the threaded rod from the upper light housing. Screw WARNING: Improper installation could cause the light fixture to fall. Lower Switch Housing Steps 1-2 Plug Button Step 6 Steps 3-5 43565-01 • 03/05/10 • Hunter Fan Company... - Page 5 9. Reinstall screws to reattach the lower switch housing to the Step 7 upper switch housing. 10. Go to the instructions for Installing the Bulbs, Chains, and Globe. Plug Connector Steps 9-10 Housing Assembly Screw Lower Switch Housing Plug Connector Detail 43565-01 • 03/05/10 • Hunter Fan Company...
-
Page 6: Installing The Light Kit On Fans With Non-Removable Switch Housing
CAUTION: Be sure no bare metal wires or wire strands are visible after making the connections. Attachment WARNING: Improper installation Screw could cause the light fixture to fall. Wires and Wire connectors Light Fixture Steps 3-6 Steps 7-10 43565-01 • 03/05/10 • Hunter Fan Company... - Page 7 12. Securely tighten the two screws. 13. Go to the instructions for Installing the Bulbs, Chains, and Globe. Wires and Wire connectors Steps 11-12 43565-01 • 03/05/10 • Hunter Fan Company...
-
Page 8: Original
Installing the Light Kit on the Hunter Original 1. Uninstall the two screws from the switch housing plate. NOTE: Save the switch housing cap should you choose to remove the light fixture in the future. 2. Remove the wire connectors from the two wires in the switch housing labeled “Connect Light Here”... -
Page 9: Installing Bulbs, Chain, And Globe
Drape the pull chain over the top of the globe. You may purchase a pull chain extension if you want a longer one. The installation is complete and you can restore power to the ceiling fan. (included) Steps 1-3 43565-01 • 03/05/10 • Hunter Fan Company... -
Page 10: Troubleshooting
If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com. Hunter Fan Company 7130 Goodlett Farms Pkwy. # 400 Memphis, Tennessee 38016 This Light Fixture Weighs 5 lbs. Printed in China 43565-01 • 03/05/10 • Hunter Fan Company...
Need help?
Do you have a question about the Rosette and is the answer not in the manual?
Questions and answers