Ricoh GR DIGITAL M User Manual page 93

• If On is selected for ADJ. Direct ISO Control in the key custom
settings, ISO sensitivity can be changed by pressing the ADJ. lever
left or right in the shooting mode. In mode P and A, ISO sensitiv-
ity can be also changed by pressing the shutter-release button
halfway.
• ISO Setting can be assigned to the ADJ. lever in ADJ Lever Set-
ting (page 117) or Fn buttons in Fn Button Pair Setting (page
119).
Magnification Ratio (MF)
The zoom ratio for the zoom by pressing and holding
C/D button can be selected from 2 × and 4 ×.
Restore Defaults
To restore default shooting menu settings (pages
50–52), rotate the mode dial to 5 and select Re-
store Defaults in the shooting menu. A confirmation dia-
log will be displayed; highlight Yes and press C / D
to restore default values and exit to shooting mode.
Auto Aperture Shift
If On is selected, the camera will automatically adjust ap-
erture to prevent overexposure in mode A.
Note
• Auto aperture shift is available only in mode A.
Shutter Speed Auto Shift
If On is selected, the shutter speeds are adjusted auto-
matically to achieve optimal exposure when overex-
posed or underexposed.
83