Ricoh GR DIGITAL M User Manual page 115

3
Connect the camera.
Open the terminal cover and
plug the cable into the com-
mon terminal for USB port/AV
output.
Press the ADJ. lever in. The
camera will turn on and the
message will be displayed;
press the ADJ. lever in again
immediately.
Note
• If you do not press the ADJ. lever in while the above message
is displayed, it may in some cases be replaced after two sec-
onds by a message stating that the camera is connecting to
a computer. Turn the camera off and press the ADJ. lever in
again.
The message will be replaced by the PictBridge play-
back display. If the PictBridge playback display does
not appear, the camera is still establishing a connec-
tion to the printer.
Caution
• Do not use force when connecting the USB cable or when han-
dling the camera with the cable connected.
105