Ricoh GR DIGITAL M User Manual page 69

Choosing the Focus and Metering Target
Target selection can be used to set focus and exposure
for off-center subjects without moving the camera, mak-
ing it easier to use a tripod.
Select a type of target in Move Target Setting in the
shooting menu beforehand (page 74).
1
Activate target selection.
Press the ADJ. lever in and then press the lever left or
right to highlight P and press C / D .
2
Position the target.
Using the ! , " , # , and $ but-
tons, position the cross hairs
over your subject and press
C / D (to return to the
target selection menu, press
the DISP. button).
3
Take the picture.
Note
• Target selection is not available in subject tracking and manual
focus modes (page 55).
• AF target selection remains in effect until a new target is selected.
• Target selection is canceled if changing to the manual focus
mode.
• The Fn buttons can be used for focus target selection in macro
mode if Macro Target is selected for Fn Button Pair Setting
(page 119). Press N or " to cancel the target selection func-
tion.
• AE/AF target selection cannot be used with the macro target
function. To use the macro target function, press the DISP. button
to cancel the target selection in AE/AF target selection mode.
Cancel Ok
DISP. OK
Target
AF
59