Table of Contents
Advertisement
❖ IP-Fax Settings
Function name
Enable H.323
Enable SIP
H.323 Settings
SIP Settings
Program / Change / Delete Gateway
❖ Administrator Tools
Function name
Program / Change / Delete Standard Mes-
sage
Store / Change / Delete Auto Document
Program / Change / Delete Scan Size
Print Journal
Transmission Page Count
Forwarding
Memory Lock RX
ECM
Parameter Setting
Program Special Sender
Box Setting
Description
Specify whether or not H.323 is used for IP-
Fax transmission.
Specify whether or not SIP is used for IP-Fax
transmission.
Set the IPv4 address and alias telephone
number of the gatekeeper.
Set the SIP server's IPv4 address or host
name, and SIP user name.
Register, change, or delete the gateway used
for transmission to IP-Fax.
Description
Use this function to program standard mes-
sages to be printed at the top of the first page
of the original.
You can program, change, or delete pages
stored as auto documents.
You can program, change, or cancel fre-
quently used scan sizes.
The Journal allows you to check a maximum
of the last 50 communications (receptions and
transmissions) performed by the machine.
This function allows you to check the total
number of pages transmitted and received.
This function allows you to have documents
printed on the machine, and sent to a speci-
fied End Receiver.
When you switch Memory Lock on, received
documents are stored in memory and not
printed automatically.
If part of a transmission fails because of a line
problem, the lost data is automatically resent.
User Parameters allow you to customize var-
ious settings to suit your needs.
By programming particular receivers as Spe-
cial Sender in advance, you can have Special
Senders treated differently.
The following functions are for delivery and
transfer of documents: Personal Box, Infor-
mation Box, Transfer Box.
7
Advertisement
Table of Contents
